Nashville Plumbing Repair

Signs of a pipe leak include increased water bills, damp spots on walls or ceilings, and reduced water pressure. You might also hear dripping or running water when no fixtures are in use. A plumber can use leak detection tools to locate and repair the issue before it worsens.

A dripping faucet is usually caused by a worn-out washer, faulty O-ring, or a damaged valve seat. Even a small leak can waste gallons of water over time, increasing your utility bill. Replacing the damaged component can stop the leak and restore proper function.

If your garbage disposal won’t turn on, first check if it’s plugged in and press the reset button on the bottom. If it’s humming but not spinning, a jammed object may be blocking the blades. Never put your hands inside—use a hex key to manually turn the motor from underneath or call a plumber for repairs.

A rotten egg smell in your water is often caused by sulfur bacteria or a reaction with your water heater’s anode rod. Flushing the water heater or replacing the rod can help eliminate the odor. If the smell is present in both hot and cold water, a plumber may need to test your water supply for contamination.

Yes, in many cases, fixing a running toilet is as simple as adjusting the float, replacing the flapper, or tightening the fill valve. These parts wear out over time and can cause continuous water flow. If basic fixes don’t work, a plumber can inspect for more serious issues inside the tank.

A popping or rumbling sound from your water heater is usually caused by sediment buildup in the tank. The sediment traps water beneath it, which then boils and creates air pockets. Flushing the tank regularly can help prevent this issue and extend the life of your water heater.

If multiple drains in your home are slow or backing up, your sewer line may be clogged or damaged. Avoid using water and call a plumber immediately to inspect and clear the blockage. Tree roots, grease buildup, and pipe damage are common causes of sewer line issues.

If your shower runs out of hot water too fast, your water heater may have a faulty heating element, sediment buildup, or be too small for your household’s needs. Flushing the tank or adjusting the thermostat may help improve performance. If the problem continues, a plumber can determine whether a repair or replacement is needed.