Nashville Toilet Installation & Repair

A weak flush is often caused by a clogged drain, a faulty flapper, or low water levels in the tank. Checking for blockages and ensuring the flapper seals properly can often resolve the issue. If the problem persists, adjusting the water level or replacing worn-out components may be necessary.

Frequent clogs can result from flushing too much toilet paper, non-flushable items, or a partial blockage in the drain. Using a plunger or a toilet auger can help clear minor clogs. If the issue continues, there may be a deeper plumbing problem that requires professional attention.

If your toilet starts to overflow, turn off the water supply valve behind the toilet immediately. Use a plunger to try to clear the blockage, and avoid flushing again until the water drains. If plunging doesn’t work, a plumber may need to inspect the drain for a deeper clog.

A gurgling toilet is often a sign of a blocked or poorly vented drain, which can cause air to get trapped in the plumbing system. This may also indicate a partial sewer line clog. If multiple drains in your home are affected, a professional drain inspection may be needed.

A constantly running toilet is usually caused by a faulty flapper, a stuck float, or an issue with the fill valve. Replacing the flapper or adjusting the float can often stop the continuous water flow. If these fixes don’t work, replacing the fill valve may be necessary.

A weak flush can be caused by a clogged rim jet, low water levels, or mineral buildup in the drain passages. Cleaning the rim jets with vinegar or adjusting the tank’s water level can improve flushing power. If the problem persists, upgrading to a high-efficiency toilet may be a good option.

Small cracks in a toilet tank or bowl may be sealed with waterproof epoxy, but this is often a temporary fix. Larger cracks can lead to leaks and should be addressed immediately. In most cases, replacing the toilet is the safest long-term solution.

If your toilet has frequent leaks, cracks, or persistent clogging issues, it may be time for a replacement. Older toilets also use more water per flush, making a high-efficiency model a cost-saving upgrade. A plumber can help determine whether a repair or replacement is the best option.